Frogg Toggs Heat Resistant Patch Kits

Frogg Toggs Ultimate Waterproof Repair Kit is designed for all types of waterproof repairs, including rain gear, waders, and boots.

Kit contains: Patch adhesive, scrubber, applicator brush, as well as rubber, and heat resistant materials.

Directions:

Clean and dry the affected area. For Rubber boots or waders, use the scrubber to roughen the surrounding area. (DO NOT us the scrubber for rain wear, neoprene or breathable waders) Cut a patch that is 2 times larger than the area to be covered. Use applicator to apply thin layer of adhesive to patch and targeted repair area. Allow the adhesive to dry for 15 minutes. Then apply a second coat to both areas and let dry until tacky. Place the patch firmly on the targeted area and press the entire are flat. Then us a rounded surface, like a bottle or can to press out all air bubbles and wrinkles. For best results allow to dry flat for 24 hours.

Frogg Toggs Smokin Toad Heat Resistant Patch Kit -

Contains: Heat resistant patch, patch adhesive and applicator brush. Easy to Use.

Directions:

To apply the Frogg Toggs SMOKIN TOAD heat shield kit to your Frogg Toggs locate the area on your Frogg Toggs where suit may come in contact with heat. Clean and dry area first, apply adhesive to the heat shield and the rain suit and let dry 15 minutes then reapply adhesive, wait until tacky and apply heat shield to rain suit, press flat and let dry overnight.

This is has the same material as the Frogg Toggs suits with an exception to the Elite suits.